Water-cooled Plating Rectifier
LIMITED TIME OFFER:
Extended 3-year warranty
on new orders in Europe
until 31 December 2024
Five reasons to buy FlexKraft water-cooled rectifier
- Your plating environment is too hot for air cooling (40°C or more)
- You don’t want to invest in a controlled cooling environment for your power supplies
- Conditions are too dusty or harsh for effective air cooling
- You want to reduce thermal stress to optimise rectifier life and performance
- You use corrosive alkaline solutions, or powder bases that generate particulates
Plus: Take advantage of our limited-time offer: Our water-cooled FlexKraft rectifiers now come with an extended 3-year warranty, up from the standard 2 years. This offer is available in Europe until December 31, 2024.
FlexKraft water-cooled rectifiers have consistently demonstrated improved reliability and performance in electroplating processes, including chrome plating, alkaline zinc, zinc-nickel, reel-to-reel plating, and copper electrowinning.
Optimize your high-current AC to DC power supply needs for electroplating lines with our FlexKraft air-cooled SMPS rectifier. Ideal for applications not affected by the above-mentioned environmental conditions.
FlexKraft high-current rectifier, water cooled
- Features
- Technical Data
- Downloads
Key Technical Advantages
Standardization and modular design
- facilitate redundancy. If a module would fail, operation can be continued with less output
- It takes less than 15 min to exchange a faulty power module, reducing standstill.
- allow for an optimized configuration, saving space and upgrading the power size when needed.
- with one critical spare part /power module fitting to the entire range of the power supply regardless size and manufacturing year, service/repair are straightforward
- enable spares optimization, reducing inventory needs and costs.
Dual output
- The possibility to have one power supply working as two, saves space and up to 15% of the investment cost
Control system
- The power supply can be run in both CV and CC-mode without limitations, with possibility to set both voltage and current separately. This provides total control of the electroplating process – of highest value when requiring voltage limitation at controlled current.
Operating conditions
- FlexKraft can operate continuously at maximum output for longer periods in ambient temperature of up to 50°C.
The table below displays possible current and voltage values, along with corresponding power supply dimensions.
| Output voltage |
Number of power modules | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.5 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | ||
| 0–12V | Output DC current | 300A | 600A | 1200A | 1800A | 2400A | 3000A | 3600A | 4200A | 4800A | 5400A | 6000A |
| 0–15V | 250A | 500A | 1000A | 1500A | 2000A | 2500A | 3000A | 3500A | 4000A | 4500A | 5000A | |
| 0–20V | 200A | 400A | 800A | 1200A | 1600A | 2000A | 2400A | 2800A | 3200A | 3600A | 4000A | |
| 0–24V | – | 300A | 600A | 900A | 1200A | 1500A | 1800A | 2100A | 2400A | 2700A | 3000A | |
| 0–30V | – | 250A | 500A | 750A | 1000A | 1250A | 1500A | 1750A | 2000A | 2250A | 2500A | |
| 0–36V | – | – | – | 600A | – | – | 1200A | – | – | 1800A | – | |
| 0–40V | – | 200A | 400A | 600A | 800A | 1000A | 1200A | 1400A | 1600A | 1800A | 2000A | |
| 0–45V | – | – | – | 500A | – | – | 1000A | – | – | 1500A | – | |
| 0–48V | – | – | 300A | – | 600A | – | 900A | – | 1200A | – | 1500A | |
| 0–60V | – | – | 250A | 400A | 500A | 600A | 750A/ 800A |
– | 1000A | 1200A | 1250A | |
| 0–72V | – | – | – | 300A | – | – | 600A | – | – | 900A | – | |
| 0–75V | – | – | – | – | – | 500A | – | – | – | – | 1000A | |
| 0–80V | – | – | 200A | – | 400A | – | 600A | – | 800A | – | 1000A | |
| 0–84V | – | – | – | – | – | – | – | 600A | – | – | – | |
| 0–90V | – | – | – | 250A | – | – | 500A | – | – | 750A | – | |
| 0–96V | – | – | – | – | 300A | – | – | – | 600A | – | – | |
| 0–100V | – | – | – | – | – | 400A | – | – | – | – | 800A | |
| 0–105V | – | – | – | – | – | – | – | 500A | – | – | – | |
| 0–108V | – | – | – | – | – | – | – | – | – | 600A | – | |
| 0–120V | – | – | – | 200A | 250A | 300A | 400A | – | 500A | 600A | 600A | |
| Height* | 450 mm | 450 mm | 590 mm | 730 mm | 870 mm | 1010 mm | 1150 mm | 1290 mm | 1570 mm | 1710 mm | 1850 mm | |
| Weight* | 42 kg | 49 kg | 76 kg | 102 kg | 133 kg | 160 kg | 188 kg | 220 kg | 251 kg | 286 kg | 315 kg | |
* For voltages above 120V or currents above 6000A, contact KraftPowercon.
** The red ‘D’ symbol means that the rectifier can have dual outputs with maximum current halved.
Reach out to us by contacting one of our locations, filling out the form, or using our chatbot to connect with the right expert
- Our contact centers
Having reliability issues with your high-current power supply? Or need to buy new rectifiers?
Please contact us
Need help with your high-current power supply?
Product Support
Enter as much details as possible below and our engineer will get back to you shortly.